testtest

Cartridge of the Week

Talyn

SAINT
Founding Member
The .30-40 Krag

1609086655423.png


The .30-40 Krag (also called .30 U.S., or .30 Army) was a cartridge developed in the early 1890s to provide the U.S. armed forces with a smokeless powder cartridge suited for use with modern small-bore repeating rifles to be selected in the 1892 small arm trials. Since the cartridge it was replacing was the .45-70 Government, the round was considered small-bore at the time. The design selected was ultimately the Krag–Jørgensen, formally adopted as the M1892 Springfield. It was also used in M1893 and later Gatling guns. Though the U.S. Navy and Marine Corps had adopted limited numbers of smokeless powder and bolt-action rifles, the .30-40 was the first cartridge adopted by the US Army that was designed from the outset for smokeless powder. After a brief experiment with a 230-grain bullet loading, the .30 Army loading was standardized in 1894 using a 220-grain metal-jacketed round-nose bullet with 40gr of nitrocellulose powder. This loading developed a maximum velocity of 2,000 ft/s in the 30-inch barrel of the Krag rifle, and 1,960 ft/s in the 22-inch barrel of the Krag carbine.

The rimmed .30-40 round was also known as .30 Army, or .30 U.S. Although the .30-40 Krag was the first smokeless powder round adopted by the U.S. military, it retained the "caliber-charge" naming system of earlier black powder cartridges, i.e. a .30-caliber bullet propelled by 40 grains of smokeless powder.

The first use of a smokeless powder round by Winchester was a single shot in 30-40, and it was one of only three rounds for which the 1895 Winchester lever action, introduced in 1896, was originally chambered. From the outset, the .30-40 cartridge proved popular for hunting, and was chambered in a variety of firearms. In 1899, a Krag in .30-40 caliber was used to shoot the world-record Rocky Mountain elk. The record stood until the latter half of the 20th century.

In October 1899, after reviewing the experiences of the Spanish–American War, U.S. Army ordnance authorities developed a new loading for the .30 Army used in the Krag rifle, in an attempt to match the ballistics of the 7×57mm Mauser cartridge employed by Spanish forces in that conflict. The new loading increased the muzzle velocity in the rifle version of the Krag to 2,200 ft/s at 45,000 psi. However, once the new loading was issued, reports of cracked locking lugs on service Krags began to surface. In March 1900 the remaining stocks of this ammunition (some 3.5 million rounds) were returned to the arsenals, broken down, and reloaded back to the original 2,000 ft/s specification.

In 1903, after recommendations from the infantry Small Arms Board, the U.S. Army formally adopted a higher-velocity .30-caliber replacement for the .30-40 or .30 Army cartridge. The new cartridge was designated by its year of adoption, the .30-03.
 
A very interesting article. The Krag-Jorgesen rifle itself must share in the demise of the cartridge. Although one of the smoothest bolt actions ever created the soldier/marine had to deal with loose cartridges to reload in a dusty, dirty, muddy battlefield.
One has to wonder: since we had to pay for copyright infringements on the Mauser action why not just utilize the 7x57 as well? :unsure:
 
The patent infringements were very minor between the Mauser action and the Springfield action.

Mauser Patents (#'s below) used on the 1903 Springfield.
  1. 467180, Shell Extractor = 20 cents per arm
  2. 477671, Shell Extractor & Collar = 5 cents per each arm.
  3. 482376, Clips, (called cartridge holder for magazine guns) = 50 cents per thousand clips
  4. 527869, Oct, 1894 , Magazine = 25 Cents per each arm.
  5. 547932, Clip (called cartridge pack) = 50 cents per thousand clips.
  6. 547933, Safety, covered by 590271
  7. 590271, Sept, 1897 = 25 cents per each arm
For example: The last item in the list above (US Patent No 590271) was described as a "Small Lock for Bolt Guns". One component of this item is described as the "Catch" which is the spring loaded plunger that locks the bolt and bolt plug together when the bolt is out of battery. The Mauser design operates axially with the bore. The 1903 has a similar feature but operates perpedicular to the bore. That difference wasn't enough to convince the powers to be that it was sufficently fifferent.

Plus, DWM (German ammo manufacturer) won a claim against the US Ordnance Department saying the US used the spitzer bullet design without compensating DWM.

Several different cartridge designs were used in Mauser rifles. The Latin American countries primarily used the 7x57, whereas others, including Germany used the 8x57 & the Swedes went with the 6.5x55 in their Mauser varient. So, the US went their way in cartridge development, as did the major countries at the time.
 
Last edited:
The patent infringements were very minor between the Mauser action and the Springfield action.

Mauser Patents (#'s below) used on the 1903 Springfield.
  1. 467180, Shell Extractor = 20 cents per arm
  2. 477671, Shell Extractor & Collar = 5 cents per each arm.
  3. 482376, Clips, (called cartridge holder for magazine guns) = 50 cents per thousand clips
  4. 527869, Oct, 1894 , Magazine = 25 Cents per each arm.
  5. 547932, Clip (called cartridge pack) = 50 cents per thousand clips.
  6. 547933, Safety, covered by 590271
  7. 590271, Sept, 1897 = 25 cents per each arm
For example: The last item in the list above (US Patent No 590271) was described as a "Small Lock for Bolt Guns". One component of this item is described as the "Catch" which is the spring loaded plunger that locks the bolt and bolt plug together when the bolt is out of battery. The Mauser design operates axially with the bore. The 1903 has a similar feature but operates perpedicular to the bore. That difference wasn't enough to convince the powers to be that it was sufficently fifferent.

Plus, DWM (German ammo manufacturer) won a claim against the US Ordnance Department saying the US used the spitzer bullet design without compensating DWM.

Several different cartridge designs were used in Mauser rifles. The Latin American countries primarily used the 7x57, whereas others, including Germany used the 8x57 & the Swedes went with the 6.5x55 in their Mauser varient. So, the US went their way in cartridge development, as did the major countries at the time.
Don’t forget the Argentines (iirc) had a .30 Mauser...7.65x53.
 
Back
Top