Determining Correct Cleaning Rod Length

[Talyn]

​

Bolt Action For bolt action rifles, Bore Tech recommends that the cleaning rod handle stops before it passes over the rifle stock. This prevents interference with high cheek pieces, accounts for rod guide length, and keeps the rod centered in the bore. 1. Measure the Overall Length (OAL) of your firearms 2. Using measurement, select the next longest rod length available Example: Rifle OAL= 42.5 Inches; Recommended Rod Length = 44.0 Inches​

​

AR Platform 1. Measure barrel length, including any flash hiders, brakes, etc. 2. Measure rod guide OAL 3: Use measurements and below formula to calculate recommended rod length Barrel Length + Rod Guide Length + 3 Inches = Recommended Rod Length Example: Barrel/Flash Hide OAL = 18.0 Inches AR-15 Patch Guide OAL = 14.0 Inches Additional Length = 3.0 Inches Formula Results = 35.0 Inches; Proper Rod Length = 36 Inches​

​

Semi-Auto/Lever Action For semi-auto/leaver action rifles that must be cleaned from the muzzle, Bore Tech recommends trying to keep the rod length as short as possible while making sure that jags and brushes completely clear the chamber. A muzzle guard is recommended. 1. Measure barrel length including any flash hiders, brakes, etc. 2. Using measurement, select the next longest rod length available Example: Barrel OAL = 22.0 Inches; Recommended Rod Length = 25.0 Inches​

​

Rod Length All rod lengths are the "Working Length" of the rod. The measurements DO NOT include the length of the handle. For rod overall length, add 5.5 inches to the rod's working length.​

 

[KillerFord1977]

“That’s what she said”

Sorry, just couldn't Resist

 

[KillerFord1977]

I’ve actually been subject to the wrong tools for the trade long ago while new at long guns. You’d think rods and patches are universal, but nope, not the case.
Pays to have proper equipment for our “honey of a rifle”

 

[Keystone19250]

I’ve actually been subject to the wrong tools for the trade long ago while new at long guns. You’d think rods and patches are universal, but nope, not the case.
Pays to have proper equipment for our “honey of a rifle”

I prefer a vinyl coated cable.

 

[javbike]

“That’s what she said”

Sorry, just couldn't Resist

Ha ha good one

 

[nmedge]

Good long rod is best.

 

[Bassbob]

I have a pile of them. And a pile of boresnakes, which I prefer for cleaning when I can. And then a rod for patches and oiling.

 

[Pitdogg2]

I prefer one piece stainless steel. I've had two from Midway for decades. I bought two Gunslick one piece stainless steel rods at a gun show and the guy had a stainless pistol model I bought that as well. If these last as well as the old Midway models then they be the last I need until my 90's