Dimension needed for SA Prodigy Compact 3.5

[everSearching]

Would someone be able to provide me with the dimension from the outside of the trigger guard to the center of the front most slot/notch on the picatinny rail? My gun is with SA for a few weeks and I wanted to research a few light and laser options for it. Just want to make sure the light will mate to the frame. Thank you. Tony

 

[mikep]

Streamlight TLR-7a is a decent choice in my opinion.
I checked the SA site for a dimensions diagram but no luck.
Best bet may be go to your lgs and take measurements on the display item, if they have one.
Or, call SA and ask if a dinensions diagram is available.
That’s all i got.

 

[mikep]

One more thought. Try this website. Search for your prodigy (this shows the ds compact) and if you scroll down you see all sorts of angles of the gun next to rulers.

Compare Springfield 1911 DS Prodigy 3.5" size against other handguns | Handgun Hero

Compare the dimensions and specs of Springfield 1911 DS Prodigy 3.5"

www.handgunhero.com

 

[everSearching]

Thanks mikep,

I'll hopefully be able to find the measurment with the suggestions you've provided. The help is much appreciated.

Best,

Tony

 

[everSearching]

One more thought. Try this website. Search for your prodigy (this shows the ds compact) and if you scroll down you see all sorts of angles of the gun next to rulers.

Compare Springfield 1911 DS Prodigy 3.5" size against other handguns | Handgun Hero

Compare the dimensions and specs of Springfield 1911 DS Prodigy 3.5"

www.handgunhero.com

Pulled the image of the Prodigy Compact into a photo markup app and came up with this. It's not as good as a fully dimensioned sketch but it might do.

Thanks again.

 

[mikep]

Pulled the image of the Prodigy Compact into a photo markup app and came up with this. It's not as good as a fully dimensioned sketch but it might do.

Thanks again.

View attachment 75814

i'm putting it a 1-3/8". probably good enough for what you want.

 

[mikep]

@everSearching , on a side note... why did you have to send your prodigy back to SA if you don't mind me asking?

 

[everSearching]

@mikep Mike, The gun would not cycle. The round would be stripped from the mag but not enter the chamber. Right out of the box. Brand new gun. Frustrating to say the least .