testtest

Hand Primer Tool ~~~ Review

SMSgtRod

Professional
Founding Member
Before using any priming tool make sure you have your eyes on.
When hand priming have the case pointed away from you, other people and objects.
(I have hand primed hundreds of thousands of cases and NEVER had one ignite. That means
they are perfectly safe or I'm over due. Either way always be safe as I am)

I have two RCBS hand primers. They both will load small or large, pistol or rifle primers.

The first one that I acquired is listed as a Hand Primer.
Pros: Works as advertised.
Cons: For each caliber you want to load you must have that shell holder installed.
Primer tray will hold 100 primers and is grooved to easily flip primers to proper orientation.
Cost is about $50..... Sometimes on sale with $10 off.
Hand Primer Shellholder.JPG
Second is the Universal Hand Primer.
Pros: Needs no shell holder for 32ACP to 45-70 Calibers.
Cons: Doesn't handle my 45LC/454 Casull cases.... they pop out.
Primer tray will hold 100 primers and is grooved to easily flip primers to proper orientation.
Cost is about $70.... Can sometimes be found on sale with varying savings.
Hand Primer Universal.JPG

As the universal handles all but my 45's I purchased a second 45 shell holder and have dedicated it to
my standard hand primer. I leave it set up for large primers and I'm always good to go.

I prefer to hand prime over press priming as I can feel and view the primer for proper seating.
A primer that is not fully seated may take two strikes of the firing pin to ignite. First hit fully seats the
primer, while the second strike will then fire the cartridge.
 

Attachments

  • Hand Primer Universal.JPG
    Hand Primer Universal.JPG
    46.6 KB · Views: 636
Last edited:
I have 2 of the RCBS with shell holder use. I've primed with them forever. I had one primer go off about 10 yrs ago. I was priming 7.62x51 for my M1a. I didn't get the pocket crimp out completely, and I squeezed too hard. Boom! Fortunately, no other primers went off, and the case was pointed away. Lesson learned.
 
I have 2 of the RCBS with shell holder use. I've primed with them forever. I had one primer go off about 10 yrs ago. I was priming 7.62x51 for my M1a. I didn't get the pocket crimp out completely, and I squeezed too hard. Boom! Fortunately, no other primers went off, and the case was pointed away. Lesson learned.
That does it..... it happened to you, never happened to me, means after all I have primed that I'm over due. I will double up on the safety aspect.... thanks for the info.....
 
Especially when it comes with no hazmat or 1 penny charge!
Midway USA will have free shipping at times and then free hazmat. For me hazmat runs around $13 and shipping is about $8 so I get the powder and primers when the no hazmat shows up. They never have both. No shipping is $49 min and no Hazmat is $150 minimum order. 5K of primers and few pounds of powder more than covers it.
 
Midway USA will have free shipping at times and then free hazmat. For me hazmat runs around $13 and shipping is about $8 so I get the powder and primers when the no hazmat shows up. They never have both. No shipping is $49 min and no Hazmat is $150 minimum order. 5K of primers and few pounds of powder more than covers it.
Midsouth has good deals, also Bruno. At times Natchez, but far and few!
 
Midsouth has good deals, also Bruno. At times Natchez, but far and few!
We just have to be smart and shop around. I was surprised how nice jacketed bullets I could get at way less than the name brands. If you shoot plated can get them too.
If you want something and aren't in a hurry let your fingers do the walking. Quite often a few days after I have looked at an item I'll get an email from the supplier notifying me that "an item look at earlier is now on sale" and would I like to purchase it now. I think, can't prove, only think that if you haven't purchased he item after a few days they put it on sale to entice you to buy. Hey, works for me!
 
We just have to be smart and shop around. I was surprised how nice jacketed bullets I could get at way less than the name brands. If you shoot plated can get them too.
If you want something and aren't in a hurry let your fingers do the walking. Quite often a few days after I have looked at an item I'll get an email from the supplier notifying me that "an item look at earlier is now on sale" and would I like to purchase it now. I think, can't prove, only think that if you haven't purchased he item after a few days they put it on sale to entice you to buy. Hey, works for me!
Cancel the first order and the make the 1 on sale.
 
I’m partial to the Frankford Arsenal Perfect Seat Hand Primer. It runs around $60 when you can get it on sale. It has proprietary case holders included as well as rams for small and large primers. The tray, also a flipper, holds plenty of primers, though I stick to a sleeve of 100 at a time. what I like best is the ratcheting dial that allows you to set the primers where you want. Each click represents .001”. Starting out I produced many high-primer rounds....with the resulting click (insert profanity) click bang vs the desired click bang.
520782E5-96C4-4827-9298-A5B157525CDF.jpeg00945E93-90F4-4846-8CF7-47FD4CB6489B.jpeg6D23F4F5-0EFA-4B4B-963F-D19FCD976533.jpeg
 
After around 50 years of reloading, I have found the perfect priming tool for me. After starting out with the press mounted priming arm, I finally went to a hand held tool by RCBS that they quit making years ago, one that used the standard shell holder and you put one primer in at a time. It was comfortable, ergonomic, and worked (until it broke) and they had quit making it. Then it was on to the Lee round tray, which I loved. It too broke, they had quit making it, so it was on to the safety designed Lee square tray, which I found to be irritating at best. I had noticed that there was a razzle dazzle single primer hand tool available from Sinclair, but the price was exorbitant. One day browsing around Midway, I found the KM tool. Very much like the Sinclair tool (and the old RCBS tool), but utilizes the Lee primer tool shell holders, which I already had on hand. Like the expensive Sinclair tool, It's made of machined aluminum and steel, no pot metal to break. No primer trays that take up a bunch of drawer space at the bench. It may not seat primers as fast as some folks would like, but it's one bullet proof unit.

Regards,
Bill

 
Back
Top