Saint Edge trigger removal question

[moomee]

The Edge has hex screws for removal. I found a small hex but when i turn the other side turns.

Does anybody know what size hex and what is the proper procedure to remove?

thanks

 

[xdman]

Can you post a picture of what you are talking about.

If you are talk about the anti walk trigger and hammer pins…you have to have two allen keys. One to hold one side, the other to remove the other side.

 

[TEXASforLIFE]

It takes 2 Allen or torq wrenches to remove the trigger screws. There is a pin with threads on both sides that each screw threads into. You turn both at the same and equally as you can. If 1 screw comes out 1st it's ok. Just remove it the direction that has the screw left on it. Trigger pins are non-directional (tapered 1 direction or another).

 

[moomee]

Thanks guys. I appreciate it.

 

[TEXASforLIFE]

Edit:. Torx not torq

 

[Area52]

Note of caution….use a magnifier to make sure and use proper tool and size, metric or SAE.
Torx and Hex have the tendency to look “close enough” to be the same and stripping becomes easy.

 

[TEXASforLIFE]

Note of caution….use a magnifier to make sure and use proper tool and size, metric or SAE.
Torx and Hex have the tendency to look “close enough” to be the same and stripping becomes easy.

You mean hex as allen. Hex is a standard 6 point external contact. Allen head in internal contact.