trouble with feeding and jamming?
- Thread starter svas028
- Start date
KI4WTF
Elite
No charge......
Keystone19250
SAINT
@svas028
Something not mentioned but make sure you have a P-Mag designed for 300BO that may be an issue with feeding, also you don’t mention if your trying both subsonic and or supersonic?
I had the Victor pistol in 300BO and it didn’t like subsonic since they did not produce enough gas pressure to work the bolt because of the short barrel.
Break your gun down and clean it really well then oil it up, run it wet and shoot some 150 grain supersonic through it.
Aside from that (CALL) Springfield CS and talk to them about your issues.
Something not mentioned but make sure you have a P-Mag designed for 300BO that may be an issue with feeding, also you don’t mention if your trying both subsonic and or supersonic?
I had the Victor pistol in 300BO and it didn’t like subsonic since they did not produce enough gas pressure to work the bolt because of the short barrel.
Break your gun down and clean it really well then oil it up, run it wet and shoot some 150 grain supersonic through it.
Aside from that (CALL) Springfield CS and talk to them about your issues.
Boomturtle
Operator
I had a problem with my Edge PDW and it was gouging the round case then causing the round to jam in the chamber. I contacted Springfield and they had me send it back to them and they replaced the entire bcg and now it runs like a champ.
To second what keystone said... definitely get magazines specifically for 300 BO. I had jamming issues with mine as well until I switched to the correct magazine.
To second what keystone said... definitely get magazines specifically for 300 BO. I had jamming issues with mine as well until I switched to the correct magazine.