wilson combat modules.

[Belt Fed]

Changed the module on my 320 compact, this one has a bigger grip and allows the bigger mags than the compact module. colors don’t quite match the way i wanted but it’ll work. shoulda went with the gray. i will on my m17 when they come out with it.

 

[Belt Fed]

I put this one on the full sized one a while back, pictured with the old module on the compact.

 

[Lexie__M]

I have a Wilson Combat on my Sig P-320.
So much better than the original grip for my hands.

 

[KillerFord1977]

I have them on several of my 320’s.
Excellent ergonomic adaptation for the 320

 

[Hammer67]

The WC module transformed my P365XL. Fits my hand much better now.

 

[KillerFord1977]

WC grip mod also made a nice platform for my M17

 

[KillerFord1977]

Changed the module on my 320 compact, this one has a bigger grip and allows the bigger mags than the compact module. colors don’t quite match the way i wanted but it’ll work. shoulda went with the gray. i will on my m17 when they come out with it.

View attachment 37866

I went with their tan module. Worked well on my M17 .. see pic a post before this

 

[Belt Fed]

I went with their tan module. Worked well on my M17 .. see pic a post before this

May be what i do too, i emailed them a while back and ask when they were going to have the grey for the manual safety m17. they have it for the none manual. they said they can do it but will cost an extra 25 bucks for the cutout. i'll give it a little while to see if the come out with one.

they added the green and gray in a couple others. I have a few FDE handguns, was just shooting for something different.

 

[USMC1911]

I noticed that I had to change a few of my base plates. The older ones would not fit into mag well.

 

[Bassbob]

So how do these work ? You guys are calling them "Grip Module". It appears it's an entire frame. So you have to strip the guts out of the original and put them in the WC frame ?

 

[KillerFord1977]

So how do these work ? You guys are calling them "Grip Module". It appears it's an entire frame. So you have to strip the guts out of the original and put them in the WC frame ?

The trigger assembly is a “fire control unit” and a 1 piece assembly.
30 seconds to pop out FCU and swap into the “lower” grip module of the WC

 

[Bassbob]

The trigger assembly is a “fire control unit” and a 1 piece assembly.
30 seconds to pop out FCU and swap into the “lower” grip module of the WC

So everything besides the FCU is in the slide? What about the Mag release, slide lock, counter rails, etc. ?

 

[Lexie__M]

So how do these work ? You guys are calling them "Grip Module". It appears it's an entire frame. So you have to strip the guts out of the original and put them in the WC frame ?

There are certain models of Sig that are modular in design. The military wanted a modular model and chose Sig M17 an M18 for them.
The FCU (Fire Control Unit) is easily removed and is the only part with a serial number.
This means you can change so many parts to ones personal desires with the same FCU
In this case, the grip module, you easily remove the FCU and in a few second put it in new Grip module.

This is a huge benefit for us uses who love to make all type of changes for our personal desires.

Research Military pistols M17-M18 and read why they chose them.

 

[KillerFord1977]

So everything besides the FCU is in the slide? What about the Mag release, slide lock, counter rails, etc. ?

Yes,
WC mods come with a mag release pin that you pop in.
Thats it .
Rest is in the slide assembly

 

[Lexie__M]

Yes,
WC mods come with a mag release pin that you pop in.
Thats it .
Rest is in the slide assembly

Also, for other companies that make grip modules for Sig P320 and P365, you may have to reuse your original mag release of buy a new one (they are cheap)

 

[ddeuce22]

I've got one for my 365XL and it's so much nicer than the stock grip.

 

[Bassbob]

Still seems like these should be called frames.

 

[KillerFord1977]

Still seems like these should be called frames.

Call them whatever you want

 

[Hammer67]

I call them 'underpants.'

 

[Bassbob]

Call them whatever you want

Don't get snippy with me pally.

Ah, I see the pictures. That's pretty cool. I mean if you look inside something like a VP9. All the crap inside that frame would take an hour and half to get out of there. Then you'd lose 4 or 5 springs and end up at a gunsmith trying to get it all put back in there. Modular system makes sense. I reckon there are no disadvantages performance wise to this sort of design ? How much do these grip modules cost ?

I guess swapping slides ( for whatever reason) in effect means buying a new firearm ?