Wondering if anyone has had any issues with their Saint Edge safety selector moving to the safe position regardless of hammer position. Bolt charged, hammer up (12:00) or hammer down, my safety selector will move to safe. I've never had or used a platform that has had this issue or functioned this way. This is a brand new rifle too.
Saint Edge Safety Selector
- Thread starter CMW
- Start date
HansGruber
Ronin
If the bolt is charged, doesn’t the hammer have to be “down” (Cocked)?
That is, after all, one of the points of charging the bolt, besides putting a round in the chamber...
That is, after all, one of the points of charging the bolt, besides putting a round in the chamber...
The bolt isn't charged and the selector can still be placed on safe.
Regardless of the position of the hammer the selector can be moved to safe.
HansGruber
Ronin
Apparently I'm not being very clear. The selector can be manipulated to the safe position post dry fire. That is my concern.
I would recommend contacting Springfield
| Telephone: | 800-680-6866 |
| Email: | warranty@springfieldwarranty.com |
| Fax: | 309-944-3676 |
| Address: | Springfield Armory, 420 West Main Street, Geneseo Illinois 61254, Attn: Warranty Service |
TecklenburgVW
Alpha
Any update on your experience with customer support?
I have a brand new Saint Victor and my safety selector doesn't go straight up to the fire position. It stops approximately 45 degrees away from the straight up position. I'm thinking I need to contact customer support too. The firing range officer today stated that other Springfield Saint's show true north position when safety selector is moved to fire position.
TecklenburgVW
Alpha
Disregard.
Spoke to customer support; it is normal for my model to stop 45 degrees away from straight up.