Sig P320

[Old_Me]

They’re great guns, you didn’t hear this from me, but my Glocks are retired right now……even my favorite G34….now when I get into my safe I get this strange look from it…..

a couple weeks ago, i took my G-17 for a work out. that particular gun is my "back up" home defense.

then i have a G-30, that i have a holster for, as my "secondary carry" at times, (like when i take my Hellcat for it's range time), then the G-30 stays in the bedroom as well.

then my G-44, is a great fun gun for those times when i just say, "screw it, i need not concentrate so much today, on my accuracy"

i like ALL my stuff.......my favorite though...???













ALL OF THEM...!!!!!!!................

 

[Old_Me]

ok, so i checked out Wilson's modular frame, and i just ordered it, along with the weight kit.

ain't in no hurry, so ordinary FedEx shipping......maybe by February 2027 it'll get here..??

 

[KillerFord1977]

ok, so i checked out Wilson's modular frame, and i just ordered it, along with the weight kit.

ain't in no hurry, so ordinary FedEx shipping......maybe by February 2027 it'll get here..??

You’ll be happy with the WC frame.
The ergonomics are leaps and bounds over the stock 320

 

[Old_Me]

You’ll be happy with the WC frame.
The ergonomics are leaps and bounds over the stock 320

well, i figure i have spent more money on other things, so under $100 was not that big a deal

 

[dadoser]

ok, so i checked out Wilson's modular frame, and i just ordered it, along with the weight kit.

ain't in no hurry, so ordinary FedEx shipping......maybe by February 2027 it'll get here..??

Second on the Wilson grip module. I swapped one into my P320 Spectre Xcarry. Made a huge difference for me. Much better ergonmics. (no weight kits) Also went with one on my P365XL spectre -

 

[David N.]

I talk about how crappy Taurus semi-autos are because, well, they are pretty crappy. I've worked on a few and I have seen more than a few with repeated problems.

As for Sig, someone please if you can , post some evidence that ANY of them fired by themselves. There are no "Accidental" discharges. The triggers were pulled by someone or something. That is a NEGLIGENT discharge.

The holster did it?

 

[Bassbob]

The holster did it?

First off I can't see anything in that video and there is no sound. Second off, you can see they are manhandling some dude. The GD gun didn't just go off. It's very possible having a crappy holster did allow the trigger to be manipulated by the foot of the idiot they were "Processing".


Edit. After watching it a couple times it's pretty clear the guys foot hit it.

 

[Hammer67]

I'm really liking the AXG grip. It feels a lot more like a P229 than a P320.

 

[Old_Me]

my wilson lower kit is supposed to come today, instead of monday, i just got the email.

if it isn't too hot, or i feel like it, i'll switch it out today as well..

gonna be another HOT, MUGGY day here today......

 

[Belt Fed]

Wont take you 10 minutes to do. Very easy

 

[Old_Me]

Wont take you 10 minutes to do. Very easy

if it was packaged and shipped properly, may take me several months to get the darn box opened..>!!!!!

 

[Old_Me]

ok, i went for my noontime nap....so i could have the energy to do this switch over, and boy, am i glad i did...

the Mrs said the FedEx guy dropped off the package about 1:30

went to the basement at 2PM, and honestly, just finished the switch over at 3:10...!!

IT WAS NOT A 10 MINUTE JOB..........!!!!!!!!!!!.......like @Belt Fed SAID IT WOULD BE...........

i had to assemble to mag release button, with that TINY spring....oh joy to the @#*&^%@* world that was......!!!!!

then OMFG...try and remove the ###@%@^%$#% slide release....!!!!

twist this, push that, pull this, OMFG...........!!!!!!!

well, the trigger control unit DID POP OUT...OH MY GOD......SOMETHING ACTUALLY DID WHAT IT WAS SUPPOSED TO DO....!!!!!!

reinserted the trigger control into the new frame, oh &^%^$#^ joy that was....!!!

TIGHT..???? did i say TIGHT..??

well the video does say to use a soft hammer........so instead of my 20 pound sledge, i used the 10 pounder......

control unit went in........and all the holes line up..

but putting that dang-blasted slide release back in, and all the holes lining up..???

i was looking for my Korean war Claymore.........

anyway............

here are a couple of pics...


this is only 1 of the 3 weights, the 2 smaller ones fit nice and tight, this larger one, i put some tape around it, and it is snug into it's bore.

and the finished product, after all that sweating, swearing, and wishing that i had napped longer

the grip IS slimmer than the OEM, and the shaved area just under the mag release is much more comfortable as well.

now, if you'll excuse me, imma gonna take my early evening nap NOW......!!!!!!!!

i'm beat to hell.............

"10 minute job"..............

I GOT YOUR NUMBER @Belt Fed ..............!!!!!!!!!!!.............

 

[Old_Me]

i should point out, that the magazines drop out with no issues, and to install that mag release button, i used some grease to hold the spring in place.

i did not weight the OEM gun, i do not have a scale, but with those added weights to the Wilson, i did feel a "heavier" Sig after the switch over.

 

[Belt Fed]

Well im scared to post. Lol

First one took me about 10 minutes
3rd one took about 5 minutes

 

[Belt Fed]

But I'm gonna go hide anyway.

 

[Old_Me]

Well im scared to post. Lol

First one took me about 10 minutes
3rd one took about 5 minutes

fibber-fibber.........

 

[Annihilator]

ok, i went for my noontime nap....so i could have the energy to do this switch over, and boy, am i glad i did...

the Mrs said the FedEx guy dropped off the package about 1:30

went to the basement at 2PM, and honestly, just finished the switch over at 3:10...!!

IT WAS NOT A 10 MINUTE JOB..........!!!!!!!!!!!.......like @Belt Fed SAID IT WOULD BE...........

i had to assemble to mag release button, with that TINY spring....oh joy to the @#*&^%@* world that was......!!!!!

then OMFG...try and remove the ###@%@^%$#% slide release....!!!!

twist this, push that, pull this, OMFG...........!!!!!!!

well, the trigger control unit DID POP OUT...OH MY GOD......SOMETHING ACTUALLY DID WHAT IT WAS SUPPOSED TO DO....!!!!!!

reinserted the trigger control into the new frame, oh &^%^$#^ joy that was....!!!

TIGHT..???? did i say TIGHT..??

well the video does say to use a soft hammer........so instead of my 20 pound sledge, i used the 10 pounder......

control unit went in........and all the holes line up..

but putting that dang-blasted slide release back in, and all the holes lining up..???

i was looking for my Korean war Claymore.........

anyway............

here are a couple of pics...


this is only 1 of the 3 weights, the 2 smaller ones fit nice and tight, this larger one, i put some tape around it, and it is snug into it's bore.

and the finished product, after all that sweating, swearing, and wishing that i had napped longer

the grip IS slimmer than the OEM, and the shaved area just under the mag release is much more comfortable as well.

now, if you'll excuse me, imma gonna take my early evening nap NOW......!!!!!!!!

i'm beat to hell.............

"10 minute job"..............

I GOT YOUR NUMBER @Belt Fed ..............!!!!!!!!!!!.............

Old proverb……If it ain’t broke…don’t fix it!

 

[KillerFord1977]

ok, i went for my noontime nap....so i could have the energy to do this switch over, and boy, am i glad i did...

the Mrs said the FedEx guy dropped off the package about 1:30

went to the basement at 2PM, and honestly, just finished the switch over at 3:10...!!

IT WAS NOT A 10 MINUTE JOB..........!!!!!!!!!!!.......like @Belt Fed SAID IT WOULD BE...........

i had to assemble to mag release button, with that TINY spring....oh joy to the @#*&^%@* world that was......!!!!!

then OMFG...try and remove the ###@%@^%$#% slide release....!!!!

twist this, push that, pull this, OMFG...........!!!!!!!

well, the trigger control unit DID POP OUT...OH MY GOD......SOMETHING ACTUALLY DID WHAT IT WAS SUPPOSED TO DO....!!!!!!

reinserted the trigger control into the new frame, oh &^%^$#^ joy that was....!!!

TIGHT..???? did i say TIGHT..??

well the video does say to use a soft hammer........so instead of my 20 pound sledge, i used the 10 pounder......

control unit went in........and all the holes line up..

but putting that dang-blasted slide release back in, and all the holes lining up..???

i was looking for my Korean war Claymore.........

anyway............

here are a couple of pics...


this is only 1 of the 3 weights, the 2 smaller ones fit nice and tight, this larger one, i put some tape around it, and it is snug into it's bore.

and the finished product, after all that sweating, swearing, and wishing that i had napped longer

the grip IS slimmer than the OEM, and the shaved area just under the mag release is much more comfortable as well.

now, if you'll excuse me, imma gonna take my early evening nap NOW......!!!!!!!!

i'm beat to hell.............

"10 minute job"..............

I GOT YOUR NUMBER @Belt Fed ..............!!!!!!!!!!!.............

It’s because you tried to use the “reset the VCR” instructions and not the P320 instructions

 

[Funwithfuel]

A little late, this might've helped

 

[SimonRL]

ok, i went for my noontime nap....so i could have the energy to do this switch over, and boy, am i glad i did...

the Mrs said the FedEx guy dropped off the package about 1:30

went to the basement at 2PM, and honestly, just finished the switch over at 3:10...!!

IT WAS NOT A 10 MINUTE JOB..........!!!!!!!!!!!.......like @Belt Fed SAID IT WOULD BE...........

i had to assemble to mag release button, with that TINY spring....oh joy to the @#*&^%@* world that was......!!!!!

then OMFG...try and remove the ###@%@^%$#% slide release....!!!!

twist this, push that, pull this, OMFG...........!!!!!!!

well, the trigger control unit DID POP OUT...OH MY GOD......SOMETHING ACTUALLY DID WHAT IT WAS SUPPOSED TO DO....!!!!!!

reinserted the trigger control into the new frame, oh &^%^$#^ joy that was....!!!

TIGHT..???? did i say TIGHT..??

well the video does say to use a soft hammer........so instead of my 20 pound sledge, i used the 10 pounder......

control unit went in........and all the holes line up..

but putting that dang-blasted slide release back in, and all the holes lining up..???

i was looking for my Korean war Claymore.........

anyway............

here are a couple of pics...


this is only 1 of the 3 weights, the 2 smaller ones fit nice and tight, this larger one, i put some tape around it, and it is snug into it's bore.

and the finished product, after all that sweating, swearing, and wishing that i had napped longer

the grip IS slimmer than the OEM, and the shaved area just under the mag release is much more comfortable as well.

now, if you'll excuse me, imma gonna take my early evening nap NOW......!!!!!!!!

i'm beat to hell.............

"10 minute job"..............

I GOT YOUR NUMBER @Belt Fed ..............!!!!!!!!!!!.............

You’re right. Mine took 12 minutes.